Resources

This specification wiring diagram includes the trim, compensation resistance and header identification code for our standard full bridge circuit.

This specification wiring diagram includes the trim, compensation resistance and cable color code for our standard full bridge circuit.

Use our custom stud questionnaire to specify all custom application requirements, including stud geometry, measurement capacity, height restrictions and electrical specifications, and submit information to Strainsert.

Review this datasheet on the important role of spacers to prevent the loosening of hold down bolts in Universal and Fatigue Rated Load Cells.

Use this Load Pin Troubleshooting Guide for instructions on various measurements, including bridge resistance, zero load and insulation resistance, along with possible causes and solutions.

Use our Custom Load Pin Configurator to input nominal design parameters to determine application feasibility and generate conceptual load pin designs/drawings quickly and effectively.

This specification wiring diagram shows the quarter bridge internal strain gage installations and connector pin identification and wire color code for our 3-wire quarter bridge circuit.

This specification wiring diagram includes the miniature connector pin identification and cable color code for our 3-wire quarter bridge circuit.

This specification wiring diagram includes the miniature connector pin identification and cable color code for our standard full bridge circuit.

Strainsert provides this Load Pin Quick Start Guide to assist engineers in setting up and installing our load pins in their applications.

Installation instructions, including specifications for preload torque values are provided to maximize measurement accuracy and performance of Strainsert Load Cells.

The Load Cell technical note explains the Strainsert load cell’s mechanical properties and special features.

The Strainsert Wireless Load Pin is a high-performance wireless telemetry solution where wired installation may be difficult, cost prohibitive, or undesirable.

The T24 Wireless Load Cell System product range provides high-performance wireless telemetry solutions aimed at Strainsert sensor applications where wired installation may be difficult, cost prohibitive, or undesirable.

Dual Bridge Load Pins provide two independent strain gage circuits. Dual Bridge transducers may use both bridges for simultaneous control and measurement or use a single bridge for measurement with the other bridge reserved as a spare.